Now that I have my very own space dedicated to my creativities I went on the search for a kiln, refreshing my Trade Me search daily. I eventually posted a wanted ad on the local Facebook page, where I was offered a small 60cm x 60cm F.E Kiln for $350. It was perfect for my experimental ceramic attempts.
I enjoyed meeting people and sharing knowledge while being a member of Raglan’s Pottery Club however depending on the firing of a community kiln was a pain. I’d leave a piece clearly labelled for firing, and yet week after week I’d find it still sitting there patiently waiting to take its turn on one of the kiln shelves, while others seem to take priority.
I was still trying to discover how clay and glazes worked, and was excited at the possibility of being able to dabble without risking other peoples work.
I have had the shame of having a piece drip glaze onto an unfortunate piece below
I have put on the safety glasses and earmuffs to grind a piece off the valuable shelf that had suck fast by a thick runny glaze
I have had to vacuum the empty kiln after a piece had exploded due to trapped air
All my little kiln needed was a new pyrometer and a new controller… plus the electrician to install these pricey parts.
$1300 later I was ready to fire!
Years ago when I cast handmade moulds with concrete, I formed my first ‘couple’. I managed to reproduce 10 of these before the delicate mould was retired. Now, I find creating with clay and firing each original piece is much more satisfying. Each piece is completely different, some even take on a direction of their own. I enjoy this process and am always excited to see the end result, when they emerge from their final firing.
On my first attempt of my couple in clay I put a vinyl cone support under the man, thinking that the woman could be built around him, but as I created, she started to slump.
Instead of scrapping the work, I went with the clay and love the result.
You could view the piece as a man supporting a weak or sick woman, or of a woman buckling underneath the pressure of holding up and supporting the man.
With the second piece, I built a support using cut down containers held together with duct tape. I covered the containers with a bread bag for easy removal. This ensured the couple kept their form. The support pieces were removed on day 2.
Being an egg donor, I am sensitive to the struggle some couples go through to be blessed with a child. I created a baby to fit in the couples arm, making the piece complete. While the piece was drying my three-year old daughter kept putting the baby back into the couples arms, when I would have it sitting next to the piece. I loved that she always wanted the baby with its parents, and not on its own on the shelf.
The piece turned out to be an interactive one. It’s surprising how the physical act of putting the baby in its place makes you feel good.
I sponged a black slip onto both pieces.
Unfortunately the glossy glaze did not give me the desired look. Perhaps they will find a home with someone. Thankfully art appeals to an array of people. I would have preferred a matt finish and will be purchasing my own glazes for future use, and applying a thicker slip.
Live and learn.
Super happy with my find at the Raglan Resource Recovery Centre today! I couldn’t believe my luck. I had just popped up to the rubbish dump to drop off some old pallets and a sack of recyclables and saw this beauty. To any other person it just looked like a hunk of rusty metal, but to me a dream come true! It was coming home with me!
I gave it a brush down with a wire brush and applied Rust Converter to stop the rust and protect it from further damage as it forms a primer.
The next step was to give it a spray with an enamel paint. It looks amazing! I cant wait to attempt my first bowl! I may even produce a mug for my husband, who has been very patient while I get all my sculptures out of my system.
I’m gonna be all about texture. Nature inspired texture.
I’ve seen a couple of Instagram posts of bark pottery using sodium silicate.
I think that’s next on Lulu’s Lists.
I will definitely be making more of these little guys. I made them for personal Christmas gifts but had a few requests for some! A cool scale roller and hand cut fish shapes. I leaned them up on a cardboard tube cut in half to give the fish a slight curve. I experimented with what ever shades of blue the Clay Shed had. Simple and sweet.
The dreaded school holidays arrived, and to keep me sane I made sure that I had a sack of clay at my ready. I had a few ideas of what I wanted to try; some mermaids, fish and this awesome shark I’d seen online, as an award for design. I attempted my first dolphin, of which I hope to create more of, promoting an awareness of the endangered maui dolphin, which occasionally frequents the waters of New Zealand’s West Coast. These pieces would allow me to explore with some colour in the form of slips.
I also had some more meaningful pieces I want to get out; the first being a figure of a woman represented as a bowling pin. A woman who is continuously, repetitively knocked down, and yet gets back up again, all to be knocked down again. Symbolising abuse.
The second brings awareness to breast cancer. A beautiful curvaceous woman, proud of her battle wound, having had a breast removed.
Well after messing up my first two pieces, getting carried away with slips and glazes I had a bit of slip fun with the mermaids and fish, and got a wee bit arty with my ladies.
I love the red stripes, making the bowling pin imagery more obvious.
I’m not fond of glossy glazes so left my survivor lady without a glaze. A double firing of white slip.
Unfortunately the bowling pin lady must have touched something black while in the kiln, which has left a smudge on her back. The breast cancer survivor had a fleck of black glaze on her boob, which I could easily sand off with my rotary tool. I’m yet to seal her, as she has no glaze to protect her.
What do you think?
Continuing on with my motherly theme I created these two ladies, my pregnant woman having a moment with her bump and the blessed mother with her child.
This time to make sure they didn’t slump I used vinyl, taped into a cone, covered in a bread bag as a support. After the first day a drying I could remove the cone and pull free the plastic bag. If more shaping was needed, it could be done then, before the piece gets too dry. The following day I used a cut metal knitting needle to reach the end of the hollow cavity to ensure there is a gap in the clay, about the neck, creating an escape for trapped air during firing, prevent the ladies heads from blowing up, potentially taking out nearby pieces from other artists.
I had fun with the colouring of these pieces, blending brown to green on one piece and using a selection of blues on my watery woman. Unfortunately I was told about englobes, and coated the pieces in Kakapo Green and Peacock Blue. I thought this would give the girls some amazing texture and contrast. The watery lady looked ok, perhaps a bit too busy and the green lady kinda just went a solid bright green. Not really the earthy toned lady I had envisioned.
Oh well, I am told that this is what pottery is about. Experimenting. Especially when you have a group kiln, and you are not in control of the firing temperatures. I think I need to do some googling research of glazes, slips and englobes and perhaps invest in some products to my tastes, hopes and dreams.
I have not been deterred.
Dabbling with concrete and moulds yet again, I’m now creating letters and numbers!
The letters look great painted up and displayed on a shelf, and the numbers make a striking address id, either propped up in the garden or mounted on a wall!
Awesome for those holiday homes, where there isn’t a need for a letterbox!